F-One Phantom-S
F-One Phantom-S
F-One Phantom-S

F-One Phantom-S

£805.00
Tax included
Sale
Sent Successfully

F-One Phantom-S

£805.00 GBP

Ask a question

Name should not be empty
Your email address is not valid.
Your phone number is not valid.
Message content should not be empty.
Size:
  • 740
  • 840
  • 940

Description

The F-One Phantom-S range is aimed at experienced riders who are ready to reach the next level in surf foil and wing foil.

Highly manoeuverable, these foils are very responsive and will allow you to make incredibly sharp turns just as much as wide turns.

They are also the best choice for your wing foil freestyle sessions, helping you refine many of your tricks and jumps.

Finally, surf bigger waves and gain more speed as you experience thrilling sensations on the water with these foils.

  • The Phantom-S 740 is the smallest and lightest size of the entire PHANTOM range. It is geared towards experienced surf foilers and elite wing foilers. It is the perfect choice to ride in big waves, and its small surface area also makes it highly efficient and enjoyable towing-in.
  • The Phantom-S 840 is intended for talented riders looking for speed and maneuverability. Like the other Phantom foils, it is very versatile and can be used for wing foiling in winds above 20 knots and foil surfing in 1.50m waves.
  • The Phantom-S 940 is a concentrate of speed that allows radical carves and a surprisingly efficient pumping. Its highest potential can be exploited in wing or in waves > 1m, as well as in downwind.

 

Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The Titan connection allows to plug in either an aluminium or carbon mast, and the fuselage is split in two to facilitate transport.

Specs

Size Area (cm2) Span (cm) Aspect Ratio Weight (kg)
740 740 69.5 6.6 0.8
840 840 74 6.5 1
940 940 78 6.5 1
Paddles
Features
Technology
Monobloc Front Wing:

Having a stiff and solid assembly between all the parts of the foil is key to making it perform at its best as well as easy to handle.

The connection of the front wing with the fuselage is highly stressed and loaded, so it is one of the critical areas of the assembly in terms of structures.

The Monobloc front wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements.

The structural fibres of the fuselage are spread into the wing to achieve the smoothest and lightest connection.

It is also incredibly stiff and provides absolute control at all times, with the foil responding perfectly to all of the riders’ input.

When the overall dimensions are too large for convenient transportation, a connection is set into the fuselage, behind the mast where the loads are smaller.

Pre-Preg Technology:

Pre-preg makes the foils stiffer and stronger. With pre-preg fabrics, the carbon fibre is directly impregnated with epoxy resin by its manufacturer. This guarantees a perfect ratio between epoxy and carbon and represents the highest quality process. It is then cured at high temperature, bringing strength and durability.

Titan Connection:

The Titan connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.

Its format is compact which is hydrodynamically efficient and very easy to use, assemble and disassemble.