Product added to cart
As low as £1,399.00
The F-One Papenoo range offers stability and maneuverability with the performance of a smaller board.
These boards integrate 4x M6 inserts on the hull to connect a foil with a top plate, so they are all “foil ready” without it increasing the weight too much or disrupts the ride.
With its short straight outline and its large tail, the Papenoo accelerates quickly in the small to medium waves. It generates speed to pass the soft sections and then reengages to hit the shoulder of the wave as soon as it is redrawn.
The rocker line is tailored for this short shape which resulted in straighter lines to get the speed while manoeuvrability is provided by the reduced length.
The shape evolves with the addition of a winger in the outline.
This keeps the rails of the board fairly parallel in the central part offering a better planning / lift ratio and a better directional stability whilst paddling.
The Papenoo is extremely manoeuverable thanks to its narrower rear which drags less water.
The new Papenoo reacts super quickly, goes faster, the bottom turns are easier with a better projection up the wave and the top turns are also easier with a tail that reduces drag.
7'7 x 29.0" / 110 Litres / Weight: 7.7kg
7'11 x 30.5" / 123 Litres / Weight: 8.2kg
8'3 x 32.0" / 138 Litres / Weight: 8.9kg
|Width||29.0" / 74cm||30.5" / 77cm|
|Length||7'7" / 231cm||7'11" / 242cm|
|Width||32.0" / 81cm|
|Length||8'3" / 250cm|
Bamboo Sandwich Construction:
F-One's SUP boards benefit from a Bamboo Sandwich Technology construction. Every layer of bamboo is sandwiched between two layers of fiberglass or between a layer of carbon. This allows the sandwich technology to emphasize the characteristics of the bamboo. The final result is a light structure that is super strong and extremely reliable.
The top deck of the board is lined with a layer of bamboo.
For all surfers one of the inconveniences of a SUP is the large size of the rails, too big to dig into a turn. So, how do we make a sup with a thin rail without losing the volume of the board? The answer is the Beveled rail.
Small flat lateral sections in V shapes, which allows F-One to reduce the thickness of the rail in certain sections. The other advantage is that they reduce the planing surface of the board which therefore reduces drag. The combination of a thinner rail and slightly narrower width allows the board to get a better edge into the turns and a tighter arc.
- 4-PT foil mount
- Distance 160 x 90 mm
- M6 Inserts
Write Your Own Review
free shipping over £50
Hassle Free Returns